To cool the glue joint and statically discharge the edging material. The perfect addition to the release agent spraying system fitted at the machine infeed and the cleaning agent spraying system fitted at the end of the machine is the antistatic coolant system. It can be fitted downstream of the last contact pressure roller, upstream of the cross cut saws or upstream of the radius milling stations.
The Antistatic Coolant LP289/99® is sprayed directly on the glue joint and on the edging material by means of our spraying systems. As a result the glue joint surface is hardened. The glue build-up on the tools is notably reduced and consequently the glue is no longer transferred onto the edging material (indispensable for PUR). Furthermore, the edging material is statically discharged. Tracer rollers and workpieces remain free from milling chips. Milling of (flush trimming) the PVC/PP/etc. edges causes static charging of the edging material and the adjoining top and bottom face of the workpieces. Milled off chips adhere to the edging material and on the top and bottom surface of the panel negatively impairing the function of the tracer rollers and making a precise finishing by scraper blades or milling impossible. This system remedies the above problems instantly!